Call Management - Sagem D18T Bedienungsanleitung

6. Using the Multi-Handset capabilities
These functions are used for handset management when two or more handsets are registered
on the same base.
6.1.
Intercom Call/Intercom
1. Make sure your handset is on standby mode.
2. Press the
- If your installation has two handsets, the second handset is directly called, and "intercom"
followed by the handset number are displayed on the screen.
- The display shows the INT icon and the number of all registered handsets
- Enter the desired handset number or press the
registered handsets are ringing.
3. On the called handset, press the
6.2.
Answering an internal call
1. The ring melody from an internal call is different from an external call. "intercom " and the
calling handset number appear on the screen. " " is blinking.
2. Press the
3. Ending an internal call press the
6.3.

Call management

6.3.1. An external and an internal call
Transfering an external call to another handset registred on same base
1. During a call, press
2. Enter the internal call number. When the user answers, you can announce the call.
3. Press the
To switch from one call to another, press and hold down the "*" key until an aural
Note!
signal is heard.
Note!
If the called handset does not answer, press
Making conference calls (3-way conversation)
You can connect one external call to two handsets registered at the base station. All users can
talk and listen simultaneously:
1. Press
2. the internal call number. Wait until the internal user answers.
3. Press and hold
"conference" is displayed on the handset screen.
key on the handset.
key to answer. The " " stop blinking.
. The external user is put on hold.
key to transfer the call.
key. The external user is put on hold.
key, until an aural signal is heard to start a three-way conference.
key if you want to call all handsets. All
key to answer.
key.
to take back the call.
- 10 -
English