Other Functions; Browse Through Menus; Register Your Other Hand Set On A Base - Sagem D50H Bedienungsanleitung

Livre D50H EN.book Page 18 Vendredi, 12. septembre 2003 4:34 16
O F
THER UNCTIONS
O
THER

Browse through menus

Menus are organized in a hierarchical tree structure. Using the menu
block diagram, identify the path giving access to the selected function and
follow the instructions below:
On the navigator key
is displayed; confirm with OK. Repeat the operation until the function is
displayed on the screen and confirm with OK.
For any further information concerning the functions above, refer to the
base user brochure.

Register your other hand set on a base

To use your SAGEM D50H hand set on the public telephone network from
your base, you must register and match it with a base compatible with the
European GAP standard.
Get the user brochure on the base on which you want to register it, match
your SAGEM D50H hand set and find the paragraph corresponding to the
registration or matching of an additional hand set.
To register a new hand set on a base it is necessary to:
• put the hand set to registration mode,
• put the base to matching mode.
Then matching (mutual recognition of the base and the new hand set) will
be done automatically (registration may take several seconds).
Get hold of the hand set to register:
On the navigator key
SETTINGS, confirm with OK.
Select ADVANCED SET. using keys
SET HANDSET
Select SET HANDSET using keys
Valid
Return
F
UNCTIONS
, press or
, press
or
or
18
until the required path or function
or until the screen displays
. Press Valid .
. Press Valid .