Ending A Call; Register Your New Hand Set On A Base - Sagem D70H Bedienungsanleitung

Livre du MD+.book Page 9 Mardi, 9. septembre 2003 5:04 17
G
ETTING STARTED
The list of handsets registered to the base appears.
Internal call
------------------ Select the handset you want to call using
Handset 2
OK
Handset 3
The handset called rings, once someone picks up transfer the call by
Return Call
pressing the red key
To retake the call before it is picked up by the handset called, press
Return

Ending a call

At the end of the conversation, press the red key

Register your new hand set on a base

To register a new hand set on a base it is necessary to:
• put the hand set to registration mode,
• put the base to matching mode.
Then matching (mutual recognition of the base and the new hand set) will
be done automatically (registration may take several seconds).
Get hold of the hand set to register:
On the navigator key
Settings, confirm with OK.
Select Adv. Settings using keys
Adv. Settings
Select HS Settings using keys
SMS Settings
OK HS Settings
Base Settings
Return Confirm
Select Registration. Press Confirm
HS Settings
Handset name
The hand set switches to registering mode.
Registration
OK
PreferredBase
Return Confirm
On the base:
Set the base with which you want to link the hand set to matching mode:
• If you have a base incorporating an answering machine, simulta-
neously press the two top pushbuttons of the base
ral seconds.
.
.
R
, press
or
or
9
or . Press Call .
.
or until the screen displays
. Press Confirm .
. Press Confirm .
.
for seve-