Control Elements; Indoor Unit (Front); Indoor Unit (Back) - Ten-Haaft Oyster Connect Bedienungs- Und Montageanleitung

3. CONTROL ELEMENTS

3.1 Indoor Unit (Front)

1 2 3
LED 1 LED 2 LED 3
Operating keys
1. ON / Off Button This button switches the system on and off. (LED 3 green)
2. LTE / WLAN Switch between LTE network and public WLAN (LED2 green/red)
3. Info
4. Ethernet / LAN Connection For wired connection of laptop, smart TV or similar.
5. WPS Starts WLAN Protected Setup with compatible devices (LED 4 flash yellow)
LED Display front
LED 1 Signal strength LTE / WLAN (green: strong yellow: good red: weak)
LED 2 Red: WLAN Mode, Green: LTE-Mode
LED 3 Red: Standby, Green: on
LED 4 Yellow blinking: command processing activ
LED 5 Green: LTE SIM PIN OK
Red: SIM-PIN Input required
22
4 5
LED 4 LED 5
3. CONTROL ELEMENTS

3.2 Indoor Unit (Back)

2 1 3
Inputs/Outputs
1. + 2. Power supply 1. Hollow plug 2,1 mm
12V or 24 V 2. Alternative board voltage supply (Cable not included)
3. Antenna Connection of data cable to the Outdoor Unit on the vehicle roof
4. CI - Bus Optional control input
5. Service USB - port for Service purposes
6. CTRL Optional
4 5 6
23