Assembly Operation - Beko HCA 62420 B Benutzerhandbuch

Vorschau ausblenden

Inhalt

Inhaltsverzeichnis

Verfügbare Sprachen

Setting Up the Device

5.2 Hood installation

The use of screws and fastening

elements not specified in the

Operation Manual may cause the

electrical shock.

The minimum distance of hood hanging between

the surface of kitchenware placement over the

cooking range (gas, electric range), and lowest

part of the hood (Fig.3) shall amount at least 65

cm for electric cooking ranges and at least 65 cm

for gas cooking ranges. Should the cooking range

operation manual provide the higher distance

for hood installation, such higher distance

requirement shall be maintained. The installation

of the hood and chimney body is shown at the

figures (Fig.4 - Fig.9). The hood is equipped with

the fixing pins matching to the most part of walls

and ceilings. In course of the assembly, observe the

common rules for air exhaust from the premises.

Gas cooking ranges L ≥ 65cm

Electrical cooking ranges L ≥ 65cm

Fig.9 Recommended distances from the cooking

range

12 / EN

Before starting the installation:

• Check if the purchased device dimensions match

to the planned installation place.

• Disassembly and remove (if possible) any

furniture remaining in the hood installation area,

in order to ensure the easy access to ceiling or

wall, where the hood shall be mounted. If it is

not possible, protect the furniture elements

remaining in the adjacent area.

• Check, if there is a socket near the mounting

area, and control if the hood may be connected to

the ventilation channel for vapours evacuation.

• Check if there are no cables (electrical, hydraulic,

etc.) in places in which the drilling will be

performed.

• Prepare the following tools: tape ruler, pencil,

drill / electric screwdriver, drilling tool Ø8,

screwdriver, builder's level.