Klarstein FULL HOUSE 2.0 Handbuch Seite 49

Intallation
1. Make sure that all components included in the scope of delivery are complete.
2. Cut a hole of size (w x h) 870*495 mm.
3. Follow the instructions below.
Precautions
• The device must be installed by qualified personnel. Do not attempt to install the unit
yourself.
• Do not install the appliance directly above a dishwasher, refrigerator, freezer,
washing machine or tumble dryer as moisture may damage the electronics of the
appliance.
• Install the induction stove in such a way that the heat radiation can be guaranteed.
• The surface surrounding the appliance and the adjacent wall should be heat
resistant.
• To prevent damage, the interlayer and adhesive must be heat-resistant.
Establish power connection
Note: This device may only be connected to the power outlet by a qualified person.
• Before connecting to the power supply, make sure that
• the wiring in your home is suitable for the requirements of the unit,
• the voltage of the socket corresponds to the voltage indicated on the
nameplate of the device,
• the power cord complies with the requirements specified on the rating plate of
the unit.
• Do not use adapters, reducers, or branches in combination with the product as this
may result in overheating and fire hazard.
• Take care that the power cord does not come into contact with hot components
of the device. The power cord must be installed so that its temperature does not
exceed 75 °C at any time.
Note: If you are unsure whether the wiring in your home is suitable for the unit,
contact your electrician. Any modifications should only be made by a qualified
electrician.
EN
49