Operation - Klarstein FULL HOUSE 2.0 Handbuch

EN
54

OPERATION

Commissioning
1
Touch the on/off button
on the control panel
of the induction hob.
After switching on, the
appliance beeps once
and „-" is displayed on all
screens. The appliance is
now in standby mode.
Select the desired heating setting.
• If no heat setting is selected within one minute, the unit will automatically turn off. In
this case, start from step 1 again.
• You can adjust the heat setting at any time during the cooking process.
• Press one of the appropriate buttons to either increase or decrease the heat setting.
2
Place suitable cookware
on the hob you wish to
use. Make sure that the
hob and the underside of
the cookware are clean
and dry.
4
3
When you touch the
heating field selection, an
indicator light next to the
button flashes.
Select the desired cooking
zone.