GUTMANN Palma 10/1001 I/W Montageanleitung Seite 43

Ceiling mounting - island mounting - single piece tower
5. Lift the cooker hood with the motor mo-
dule and insert the threaded rods from
the tower into the tubes until the hood
body rests against the tower.
ASSEMBLY INSTRUCTIONS
6. The threaded rods from the tower now
look out ~15mm at the tube. Screw
them together with M8 nuts, making
sure that the turret rests against the
canopy body on all sides.
7. Screw the metal clips on the tube from
above to the cover of the engine modu-
le (4 x).
EN
✓
43