GUTMANN Palma 10/1001 I/W Montageanleitung Seite 38

EN
Wall mounting
11.Rubber buffer right and left each once to
the module.
12.Bend the holding notches on the upper
tower approx. 2-3mm to the outside. Pull
off the foil on the wall side surfaces.
13.Push the upper tower into the holding tab
of the tower suspension until it locks into
place.
15.Perform a function test.
After completion of the installation work, we recommend cleaning the stainless steel
surfaces with our special cleaner TZ 710. For cleaning the glass surfaces, we recommend
the glass cleaner Art. No.: 05999704. For aluminium surfaces use a soft microfibre cloth.
Do not use dry cloths. Use a mild window cleaning agent and no aggressive, acidic or
alkaline cleaners! Do not use abrasive cleaners.
38
ASSEMBLY INSTRUCTIONS
14.Widen the lower tower a little outwards
and place it over the upper tower and
the module of the cooker hood. The
lower tower must rest on the hood.