Herunterladen Inhalt Inhalt Diese Seite drucken

Operating The Device Safely - Dometic RF60 Kurzbedienungsanleitung

Absorber-kühlschrank
Vorschau ausblenden Andere Handbücher für RF60:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 18
• The insulation of the device contains flammable
cyclopentane and requires special disposal pro-
cedures. Deliver the device at the end of its life-
cycle to an appropriate recycling centre.
• Keep the condensation opening clean at all
times.
• Never immerse the device in water.
• Protect the device and cables against heat and
moisture.
• The device shall not to be exposed to rain.
Placing and connecting the device
safely
!
WARNING! Failure to obey these
warnings could result in death or
serious injury.
Fire hazard
• Ensure that the device circuit is not damaged
during transportation.
• When positioning the device, ensure the supply
cord is not trapped or damaged.
• Do not locate multiple portable socket-outlets or
portable power supplies at the rear of the
device.
A
NOTICE! Damage hazard
• Risk of overheating!
Always ensure sufficient ventilation so that the
heat generated during operation can dissipate.
Make sure that the device is sufficiently far away
from walls and other objects so that the air can
circulate.
• To enable the refrigerant to circulate properly,
the device may not tilted by more than 3°. Use a
spirit level to make sure the device is level.
• Only hold the device at the body of the device
during transport. Never hold the device at the
absorber unit, the cooling fins, the gas pipes,
the door or the control panel.
• Do not place the device near naked flames or
other heat sources (heaters, direct sunlight, gas
ovens etc.).
• Only use the AC connection cable supplied to
connect the device to the AC mains.
• Ask your vehicle manufacturer if the battery man-
agement of your vehicle shuts down the devices
to protect the battery.
• Put the device door and the freezer door into the
winter position if you are not going to use the
device for a longer period of time. This prevents
mold from forming.

Operating the device safely

!
WARNING! Failure to obey these
warnings could result in death or
serious injury.
Electrocution hazard
• Before starting the device, ensure that the
power supply line and the plug are dry.
• Disconnect the device from the power supply
– before each cleaning and maintenance
– after every use
Health hazard
• Please check if the cooling capacity of the device
is suitable for storing the food you wish to cool.
• Only use the device where there is good ventila-
tion.
• Only operate the device from a single energy
source.
• Food may only be stored in its original packag-
ing or in suitable containers.
• Opening the device for long periods can cause
significant increase of the temperature in the
compartments of the device.
• Clean regularly surfaces that can come in contact
with food and accessible drainage systems.
• Store raw meat and fish in suitable containers in
the device, so that it is not in contact with or can
drip onto other food.
• If the device is exposed to a room temperature
of below +10 °C for an extended period of time,
an uniform temperature cannot be guaranteed
in the freezer compartment. This can lead to an
increase of the freezer compartment tempera-
ture and the goods stored in it may defrost.
• If the device is left empty for long periods:
– Switch off the device.
– Defrost the device.
– Clean and dry the device.
– Leave the door open to prevent mold devel-
oping within the device.
4445103381
15

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Rf62Rf serie

Inhaltsverzeichnis