Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
maintenance
cleaning
daily cleaning
Clean the glass top after each use. You can use a mild
cleaning agent for this - for example, washing-up liquid.
Switch the childproof lock on before cleaning the control
panel.
stubborn stains
water marks; lime
Stubborn stains can also be removed with a mild cleaning
stains; traces of
agent - for example, washing-up liquid.
metal.
Remove water marks and lime stains with vinegar.
Traces of metals (due to sliding pans) can be difficult to
remove.
Remove traces of metals with a proprietary cleaning agent.
Remains of food that has boiled over are best removed with
a glass scraper. Melted plastic and sugar can also be
removed with a glass scraper.
never use
You should never use scouring agents. These cause
scratches in which lime deposits and dirt can accumulate.
Never use sharp objects such as steel wool and scourers.
tip
Before you start cleaning, turn the childproof lock on.
GB 10
If the appliance does not work properly, this does not always mean that it is defective.
Try to deal with the problem yourself first. Phone the service department if the advice
given below does not help.
fault
cause
Cooking zones do not get
Plug is not in socket.
hot.
Fuse(s) in the meter
cupboard defective.
Error codes F00-F18 in the
A button is defective or
display.
dirty or there is an object
on top of it. Each button
has its own number, from
00 to 18. The number
associated with the button
appears in the display.
Error code F3 appears.
Transistors overheated.
It is possible that too large
a pan has been placed on
the front-right zone.
Error code F99 appears.
Two or more buttons were
operated for a long time.
Metal-like marks on the
Incorrect cleaning material
ceramic hob.
used.
Scratches on the ceramic
Sliding pans across the hob
hob.
is the usual cause.
faults
what should I do if...
solution
Put the plug into the
socket.
Check the meter cupboard.
Clean the appliance or
have it repaired.
Do not place any objects
on the control panel.
Allow the appliance to cool
down until the code
disappears.
Do not operate more than
one button at the same
time.
Remove with a cleaning
material like Stahlfix.
Do not slide pans across the
ceramic hob.
GB 11
Werbung
Inhaltsverzeichnis
