Dismounting Of The Mounting Plate At Cam Widths 0330-1200 (Only Premium) - Strack PowerMax SN5650-PMO-0330 Bedienungsanleitung

PowerMax cam unit SN5650-PMO-0330 — SN5650-PMO-1200

9. Dismounting of the mounting plate at cam widths 0330-1200 (only Premium)

The PREMIUM version of the PowerMax® is equipped with a demountable mounting plate, which makes
a simpler handling possible.
The high-precision plate can be dismounted easily to be able to carry out further machining.
picture 1
picture 2
picture 3
STRACK NORMA GmbH & Co. KG · Königsberger Str. 11 · D-58511 Lüdenscheid · Tel +49 2351 8701-0 · www.strack.de
I
Operating instructions -- PowerMax cam unit PMO
The mounting plate is not screwed with the cam
slide to keep the complete working surface free
of screw holes. The plate is fixed in a form-closed
manner by a fitting groove (picture 2) and one
respectively two clamps over a clamping cone (picture 1).
The mounting plate is centered by a fitting key on the rear
side. It absorbs additionally arising lateral forces in the
production.
Step 1
Loose the fixing screws of the guide strips.
Remove the guide strips and put them
aside (picture 3). Please take care that
the sinter sliding surface is not damaged.
PowerMax
13