Dismounting Of The Mounting Plate At Cam Widths 0065-0260 (Only Premium) - Strack PowerMax SN5650-PMO-0065 Bedienungsanleitung

PowerMax
I
Operating instructions -- PowerMax cam unit PMO
PowerMax cam unit SN5650-PMO-0065 — SN5650-PMO-0260
9. Dismounting of the mounting plate at cam widths 0065-0260
(only Premium)
The PREMIUM version of thr PowerMax ® is equipped with a demountable mounting plate, which makes a
simpler handling possible.
The high-precision plate can be dismounted easily to be able to carry out further machining.
Step 1
Loose the fixing screws of the guide strips. Remove the guide strips and put them aside (picture 1).
Please take care that the sinter sliding surface is not damaged.
Step 2
Push the mounting plate out of the precision groove guidance (picture 2).
Reference borings on the sides of the mounting plate facilitate the adjustment and the positioning on the
machining center.
picture 1 picture 2
AN
16
STRACK NORMA GmbH & Co. KG · Königsberger Str. 11 · D-58511 Lüdenscheid · Tel +49 2351 8701-0 · www.strack.de