Record Of Probe Calibration - WIKA CTH6500 Betriebsanleitung

Hand Held Thermometer
CTH6500

5. Record of probe calibration

GB
Our quality probes are the key to the precision and quality of your
measurements. To facilitate the exchange of a probe without a loss
of pre cision, our probes are measured at WIKA and given a code
that defines the characteristic line of the individual probe. The
code is marked on a highly visible label fitted to the probe.
If you change the probe you have to enter the new code into the
measuring instrument. In order to avoid any problems later on
(esp. if the probe is installed somewhere not easily acces sible,
or if there are several of such external probes in use), we recom-
mend you note down the data of the probe in use.
Part no.:
Description:
Serial no.:
Calibration data:
Part no.:
Description:
Serial no.:
Calibration data:
Part no.:
Description:
Serial no.:
Calibration data:
Part no.:
Description:
Serial no.:
Calibration data:
Part no.:
Description:
Serial no.:
Calibration data:
26 WIKA Operating Instructions CTH6500