Intended Use; Safety Information - Scheppach UG200 Originalbetriebsanleitung

Introduction
MANUFACTURER:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
We hope your new tool brings you much enjoyment
and success.
NOTE:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by
the product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
Unpacking
• Open the packaging and remove the device carefully.
• Remove the packaging material as well as the pa-
ckaging and transport bracing (if available).
• Check that the delivery is complete.
• Check the device and accessory parts for transport
damage.
• If possible, store the packaging until the warranty
period has expired.
ATTENTION
The device and packaging materials are not
toys! Children must not be allowed to play with
plastic bags, film and small parts! There is a
risk of swallowing and suffocation!

Intended use

Always observe the proper use of your universal ma-
chine stand.
The universal machine stand is designed for use with
tabletop devices such as mitre saws, scroll saws, cir-
cular table saws, etc.
Electric power tools without suitable mounting holes
are not permitted to be fitted to the universal ma-
chine stand and shall not be operated in conjunction
with the universal machine stand.
Electric power tools must be firmly bolted to the uni-
versal machine stand before starting them up.
The universal machine stand is also designed as a
workpiece support when working with mitre saws,
scroll saws, circular table saws, and other similar
electric power tools. The maximum workpiece length
is 3 m.
8 | GB
Additional workpiece supports may have to be used
(e.g. a roller trestle) in order to prevent longer work-
pieces tilting. Attention: Ensure that the workpiece
support is secure and not tilted!
Do not use the universal machine stand as a ladder or as
scaffolding. Ensure that all handgrips, nuts and screws
are tightened before use. Electric power tools on this de-
vice shall not exceed an overall height of 152 cm. The
maximum payload is 150 kg. Ensure that the universal
machine stand is on a level, firm and stable floor.
Any use beyond this is improper use. The manufac-
turer is not responsible for the resultant damages,
the user bears this risk alone.
Please note that our equipment has not been de-
signed for use in commercial, trade or industri-
al applications. Our warranty will be voided if the
equipment is used in commercial, trade or industrial
businesses or for equivalent purposes.

Safety information

• Use the universal machine stand only in conjunc-
tion with suitable electric power tools!
• Check the universal machine stand for damage
each time before use. Electric power tools shall not
be mounted or operated on damaged support arms
/ crossbars.
• Electric power tools must be bolted to the support
arms / crossbars and be secured on the universal
machine stand!
• Always ensure the universal machine stand is se-
cure when setting it up.
• Always ensure that you assume a natural and safe
standing position when working.
• Do not overload the universal machine stand! Do
not use the universal machine stand for purposes
for which it is not intended.
• Modifications or unauthorised changes to the uni-
versal machine stand as well as the use of unap-
proved parts is forbidden.
• All parts of the universal machine stand, in particu-
lar the safety devices, must be correctly mounted in
order to guarantee trouble-free operation.
• Keep the universal machine stand out of reach of
children. Store the device in a location that is inac-
cessible to unauthorised persons and children.
m Attention!
When using electric power tools, in conjunction with the
universal machine stand, the respective machine-spe-
cific safety measures must be implemented as protec-
tion against electric shock, and the risk of injury or fire.
Read all of the instructions for the electric power tool that
you intend to mount and operate before using the tool.
Safety instructions for the electric device mounted
must likewise be observed.