Sys-Ex Dump; Delete A Program; Input-Adjustments; Source - Omnitronic DXO-26 PRO Bedienungsanleitung

Prog
Sys-Ex Dump and program change is possible.
Master
The complete settings and changes are transmitted to other devices with the same Midi-channel.
Thru
Passes the data from Midi In on to Midi Out.
PC Port
Activates the RS232-connection on the rear panel.

Sys-Ex Dump

With this function, you can transmit the memory content between two DX0-26 PRO or to another Midi Sys-Ex
compatible Sequenzer or computer.
Please note: a received Sys-Ex Dump can delete all settings of a device. If you do not wish that a device
accidentally receives Sys-Ex data, switch it off or adjust another Midi-channel.
Connect the Midi Out-socket of the sending device with the Midi In-socket of the receiving one.
Press the >-button of the sending device and the display shows Midi Dump? In order to leave this mode, you
can press the Prev/Next-button at any time. Press the Enter-button in order to start the transmission.
The receiving device will ask you whether the dump shall be accepted. Press the Enter-button for
confirmation.
If you do not wish that the dump will overwrite the data in the device, press the <-button (No). The device will
then ignore the incoming data.
After the Sys-Ex Dump has been started, the display shows the progress in percent. When 100 % are
reached, the transmission is finished.

Delete a program

Press the Prev/Next-buttons until the display shows Delete Prog. Select the program you want to delete via
the <>-buttons or the jog-wheel. Confirm with the Enter-button.
If a program is locked, it must first be unlocked before you can delete it.

Input-adjustments

Source

Press the jog-wheel. In the upper area, the display shows the actual mode (Input / Output). Below, the
parameter with the corresponding value is displayed.
IN SUM A+B

Delay

2.14ms
By pressing the jog-wheel repeatedly, you can select between IN A, IN B and IN SUM A+B.
Delay
IN B *
DELAY 0.007M
By turning the jog-wheel or pressing the < / >-buttons, you can adjust the desired delay.

Equalizer

IN A & IN B *
Eq1 BE11 Sp12
*
29/33 10356350_V_1_1.DOC