Gear; Cleaning And Lubrication - Husqvarna Zenoah CHTZ2460 Bedienungsanweisung

MAINTENANCE

Gear

There is a grease nipple on the gearbox. Use a grease
gun to top up with grease. This should be carried out after
approximately every 50 working hours. Use Zenoah
special grease.
Pump in grease until clean grease emerges to the blades.

Cleaning and lubrication

Clean any resin and plant residue from the blades using
cleaning agent before and after using the machine.
Lubricate the blade bars with special grease before long
periods of storage.
18 – English