Additional Safety Warnings; Technical Data; Noise And Vibration Information - MIRKA DEROS 325CV Bedienungsanleitung

en (original)
h. Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.
5. Service
a. Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.

Additional Safety Warnings

The electrical safety of the tool is granted only by using original Mirka backing pads.
Read the Materials Safety Data Sheet (MSDS) for the work surface.
If any physical hand/wrist discomfort is experienced, stop working and seek medical attention. Hand, wrist and arm
injury may result from repetitive work, motion and overexposure to vibrations.
The power supply socket and connector are non-IEC appliance couplers. Only use an original Mirka power supply cable.
The Mirka power supply cable can be bought from your Mirka Dealer.
Check the tool, backing pad, power cord and fittings regularly for wear.
Clean or replace the dust extractor´s collection bag daily. Dust can be highly combustible. Cleaning or replacing the
bag also assures optimum performance.
If the tool appears to malfunction, stop using it immediately and arrange for service and repair.
Always ensure that the work piece to be sanded is firmly fixed in place.
Keep hands clear of the spinning accessory during use.
Do not allow the tool to free speed without taking precautions to protect surrounding people and objects in the event
that the abrasive or backing pad should come loose.

Technical data

DEROS
Power
Mains voltage
Speed
Orbit
Size of backing pad
Weight
Degree of protection

Noise and vibration information

Measured values are determined according to EN 62841.
DEROS
Sound pressure level (L
Sound power level (L
Sound measurement uncertainty K
Vibration emission value a
Vibration emission uncertainty K
Specifications subject to change without prior notice. Model range may vary between markets.
64
325CV 350CV
250 W 250 W
220 240 VAC 220 240 VAC
4,000 10,000 4,000 10,000
rpm rpm
2.5 mm (3/32") 5 mm (3/16")
Ø 77 mm (3") Ø 77 mm (3")
0.8 kg (1.8 lbs) 0.8 kg (1.8 lbs)
I I
325CV
) 67 dB(A)
pA
) 78 dB(A)
WA
3.0 dB
* 2
3.1 m/s
h
* 2
2.0 m/s
550CV 625CV
350 W 350 W
220 240 VAC 220 240 VAC
4,000 10,000 4,000 10,000
rpm rpm
5 mm (3/16") 2.5 mm (3/32")
Ø 125 mm (5") Ø 150 mm (6")
1 kg (2.2 lbs) 1 kg (2.2 lbs)
I I
350CV 550CV 625CV
67 dB(A) 71 dB(A) 71 dB(A)
78 dB(A) 82 dB(A) 82 dB(A)
3.0 dB 3.0 dB 3.0 dB
2 2
3.3 m/s 3.2 m/s 2.4 m/s
2 2
1.5 m/s 1.5 m/s 1.5 m/s
650CV 680CV
350 W 350 W
220 240 VAC 220 240 VAC
4,000 10,000 4,000 10,000
rpm rpm
5 mm (3/16") 8 mm (5/16")
Ø 150 mm (6") Ø 150 mm (6")
1.1 kg (2.4 lbs) 1.1 kg (2.4 lbs)
I I
650CV 680CV
71 dB(A) 71 dB(A)
82 dB(A) 82 dB(A)
3.0 dB 3.0 dB
2 2 2
3.4 m/s 3.5 m/s
2 2 2
1.5 m/s 1.5 m/s
5650CV
350 W
220 240 VAC
4,000 10,000
rpm
5 mm (3/16")
125 x 150 mm
(5" x 6")
1.1 kg (2.4 lbs)
I
5650CV
71 dB(A)
82 dB(A)
3.0 dB
2
3.4 m/s
2
1.5 m/s