Adler europe AD 7432 Bedienungsanweisung Seite 4

14. Do not handle the device or adapter with wet hands.
15. The device should be turned off every time you put it down.
16. Do not use the device near water, for example: in the shower, in the bathtub or above the
basin with water.
17. If the device uses a power supply, do not cover it, as it could lead to a dangerous increase
in temperature and damage to the device. Always, first insert the plug into the power socket in
the device and then the power supply to the mains socket.
18. Do not use the device in folded condition. Do not put pins, needles and other metal
objects in the sheet.
19. Do not use the device if it is wet or damp. Leave the device hung loosely in a ventilated
area until it is completely dry.
20. Do not put the power cord on a warmed device. Do not fold the equipment when it is
placed on top during storage. Check the equipment periodically for signs of wear or damage.
If such signs or equipment are used improperly, please contact your supplier before
continuing to use it.
21. Store in a dry place. Never put heavy objects on the device.
22. Never go to sleep with turned on device. Unplug the power plug from the outlet.
23. Never cover the controller.
24. Before switching on the device, make sure that it is evenly distributed, there are no kinks
or folds.
25. Do not iron the device!
26. This equipment is not intended for medical use in hospitals.
28. The device should cool down before storage.
29. The device may be used only with the types of removable elements specified in the
equipment marking.
30. The device is equipped with a fuse protecting against overheating, which should not work
when used in accordance with the intended use of the equipment. If the fuse trips, the device
will stop working, the equipment must be returned to the manufacturer or its representative
for repair.
SYMBOL EXPLANATION (picture 2)
1. Read the instructions for use.
4. Only parts of the product indicated in the instructions can be ironed at a temperature of up to 110°C.
5. Do not dry clean.
7. Do not wash foot warmer's outside coating by immersing in water.
9. Product not to be used by very young children (0-3 years).
10. ONLY the parts of the product listed in the manual can be hand washed in water. Recommended water temperature 40°C.
11. Do not use the device near water, for example: in the shower, in the bathtub or above the basin with water.
SAFETY NOTES BEFORE FIRST USE
1. Do not use with any other heating device.
2. During use, make sure that the mains cables do not become trapped / tangled.
3. Make sure you do not fall asleep while in use. If you get very tired during use, please select temperature level 1 for safety. The device will
automatically turn off 90 minutes after it is turned on.
4. The product may only be used with the controller specified in the device designation: RA-1 / K15.
5. The device should not be used to heat animals.
6. Shoes and slippers must be removed before use!
PRODUCT DESCRIPTION (photo 1)
1. The outer shell of the foot warmer with heating elements
3. Driver
5. Power switch
7. Power cord socket sewn into the outer shell
9. Locking latch
USE
1. Make sure there is a power source nearby and that the power cord is not in a position when in use where you might trip over it. After
connecting to the power supply, the controller (3) must be easily accessible to the user.
2. Do not bleach.
2. Inner removable synthetic wool lining
4. LED display
6. Temperature button
8. Detachable power cord plug
4
3. Do not tumble dry.
6. Do not insert pins.
8. Do not use folded or rucked.