Ec Declaration Of Incorporation - GF EA15 Bedienungsanleitung

Instruction manual
14

EC declaration of incorporation

EC Declaration of incorporation for incomplete machines (Machinery Directive 2006/42/
EC Annex II B) and EC declaration of conformity as per EMV and low voltage directive
(2004/108/EG), (2006/95/EG)
Manufacturer:
Georg Fischer Piping Systems Ltd., Ebnatstrasse 111, 8201 Schaffhausen / Switzerland
Person authorized to compile technical documentation:
Georg Fischer Piping Systems Ltd., R&D Manager, Ebnatstrasse 111, 8201 Schaffhausen /
Switzerland
We hereby confirm that the following incomplete machine
Electrical actuator
Type: EA15
Variants: 24V AC/DC, 100-230V AC
Article numbers: 198 153 180, 198 153 181, 198 153 200, 198 153 200
fulfils all the basic requirements of the machine directive 2006/42/EC, as far as the scope
of delivery allows. We further declare that the special technical documentation has been
compiled in accordance with Annex VII, Section B of this directive. We shall forward this,
if requested, to the competent authorities via the aforementioned authorized person.
Commissioning is prohibited until it has been established that the entire machine, into which
the aforementioned incomplete machine is to be incorporated, meets the provisions of
the machine directive 2006/42/EC.
The incomplete machine also meets the requirements of the following European directives,
implementing national legal provisions, and relevant harmonized standards:
•
Electromagnetic compatibility – Directive EMV (2014/30/EG)
• Low voltage directive (2006/95/EG)
• EN 15714-2 (Electrical actuators for industrial valves)
•
ISO 5211 (actuator interface)
• EN 60068-2-6 (vibration tests)
•
VDE 0843 section 20 (EMV requirements)
Georg Fischer Piping Systems Ltd
Name: Bastian Lübke
Position: R&D Manager
Date: 2019-07-01
Georg Fischer Piping Systems Ltd
EC declaration of incorporation
67