Technical Specifications - GF EA15 Bedienungsanleitung

Technical specifications

6 Technical specifications
Nominal power
Current (calculated)
Nominal torque Mdn
(peak)
Duty cycle
Cycle time s/90° at Mdn
Flange fitting
Tested cycles
(at 20 °C and Mdn)
Weight
Actuating angle
Nominal voltage
Nominal voltage tolerance ± 15 %
Protection class
Pollution degree
Overload protection
Overvoltage category
Fuse
Ambient temp.
Feedback relays
Allowable humidity
52
EA 15
AC: 35 VA bei 100 – 230 V
AC/DC: 35 VA bei 24 V
0.3A bei 100V
0.13A bei 230V
1.7A bei 24V
10 (20) Nm
40% @ 25°C/ 15min
5 s
F05
150 000
1.85 kg
Max. 355°, set to 90°
AC: 100 – 230 V, 50/60 Hz
AC/DC: 24 V, 50/60 Hz
IP 65 (IP67)1) per EN 60529
Designed for wet & dry locations (NEC), designed for indoor use
(UV light may cause discoloration)
Operation: Pollution Level 3
Commissioning (open cover):
Only in controlled environments of pollution level 2
Current/time dependent, resetting
II
Internal: SMD fuse, 2A, not replaceable
Req. external breakers on all live wires:
Rated Current: max.16A,
Trip Curve: C
Standards Compliance: cUL489, CSA C22.2 No. 5.1, IEC 60947-2
-10 °C to +50 °C (14°F to 122°F)
Bi-stable change-over contacts; max. 2A @ 30V DC
Max. 90 % relative humidity, non condensing
Instruction manual