Buttons For Setting The End Positions - GF EA15 Bedienungsanleitung

Instruction manual

5.3.3 Buttons for setting the end positions

Buttons for setting the end positions inside the actuator
The following table describes the functions of buttons shown above:
Adjustment mode
Button
("SET" button pressed for ~3 s)
SET Press the button, until the color of
the LED of which the assigned
position is to be changed lights up
(e. g. green – CLOSE)
STORE Saving the position moved to
CCW Moving counterclockwise
CW Moving clockwise
The following table describes the functions of button combinations:
Button
Function
combination
(press ~3s)
SET + CCW LED color assignment
SET + CW Factory reset
Error mode
LED flashes yellow
Acknowledge
the error (instead
of disconnecting
the power supply)
Action
Inverting colors
Actuator will be set to the values pre-set
at the factory; all positions will be
deleted
Design and function
47