Bering INVERBOOST PX Benutzer- Und Wartungshandbuch Seite 6

Thank you to choose the INVERBOOST PX swimming pool heat pump for your pool heating, it will heat your
pool water and keep the constant temperature when ambient temperature at 7℃ to 43℃.
INDEX
1. Specification
2. Dimension
3. Stock advice
4. Installation
5. Location and connection
6. Initial operation
7. Controller Operation
8. Electrical Wiring
9. Malfunction and Trouble shooting
10. Exploded view
11. Maintenance
ATTENTION: This manual includes all the necessary information with the use and
installation of your heat pump .
1. The installer must read the manual and attentively follow the instruction in implementation
and maintenance.
2. The installer is responsible for the installation of the product and should follow all the
instructions of the errors due to the installation that disobey the manual guideline. Any use that
is without conformity at the origin of its manufacturing will be regarded as dangerous.
WARNING :
Please always keep the heat pump in a well ventilated place and away from anything which could cause fire.

Do not braze or weld the pipe if there is refrigerant inside machine. Please do not charge the gas when in a confined

space.
Please always empty the water in heat pump during winter time or when the ambient temperature drops below 0℃, or

else the Titanium exchanger will be damaged because of being frozen, in such case, your warranty will be lost.
Please always cut the power supply if you want to open the cabinet to reach inside the heat pump.

Please keep the display controller in a dry area to protect the display controller from being damaged by humidity.

Action of filling gas must be conducted by professional with R32 operating license.

- 2 -