Controller Operation - Bering INVERBOOST PX Benutzer- Und Wartungshandbuch

7. Controller Operation

7.1 Guide for operation
7.2 The keys and their operations
7.2.1 button
Press to start the heat pump unit.
Press to stop the heat pump unit.
7.2.2 and
Water temperature setting:
Press or
Press and
temperature.
7.2.3 button
Press to change the working mode, Powerful, silent and smart. The default mode is smart mode.
7.2.4 button
Press for 2 seconds to enter secondary page.
Press and
button
to set the water temperature directly.
at the same time to check water in temperature, water out temperature and set
to select the functions and press to enter.
- 12 -