Operation - Bering INVERBOOST PX Benutzer- Und Wartungshandbuch

1. Operation

1.1 Go to parameter setting
Press
1.2 and
function).
Parameter
P17 WIFI or Modbus
1.3 Final step is to download WIFI APP
phone.
2. Connection to WIFI app
2.1 Open "Alsavo Pro" APP, click "+" on the upper left and select "New device". Then Click "Next" and enter the
current WIFI password to connect. Press "
Or you can press "
If the connection is successful,
If the connection fails, the APP will indicate "Failed to connect device".
2.2 "Nickname and password" interface only appear one time when a new heat pump is connected successfully. You
can name and add encrypt this unit. (This interface may be missing if the wifi network is not steady. You will miss the
chance to name and encrypt it. In this case, default password "123456" is available.)
Note: If someone's APP is in the same WIFI network as yours, his APP could automatically identify your heat
pump. And he can operate your heat pump after inputting your password.
Instruction of WIFI connection
by long pressing
or
to choose parameter P17
Description
(APP Name: Alsavo Pro)
" 5S on the display first, then enter the current WIFi password.
stops flashing.
, then long press
Scope Default value
0-1 1
" 5S on the display no matter it's ON or OFF until
- 127 -
for 15s
Remarks
0:Modbus
1:WIFI
from App store or Google play in your smart
to set
P17=1 (WIFI
is flashing.