Bering INVERBOOST PX Benutzer- Und Wartungshandbuch Seite 20

OFF, the filtration still activated.
Condition to stop the heat pump, timer OFF actives;
Before the TIMER OFF, the heat pump stops and the filtration is still activated. When timer reaches the set
time of the TIMER OFF, the heat pump will stop and after 5 minutes the filtration pump stops.
NOTE:
Tset = Tseting water temperature, for example: Tset = 28℃ Tseting water temperature in your pool heat
pump
Tset-0.5 = less 0.5℃ than Tseting temperature, Tset- 0.5 = 28-0.5=27.5℃
Tset+0.5= more 1℃ than Tseting temperature, Tset+ 0.5 = 28+0.5=28.5℃
7.2.8 Error code
Select and press to check the error code. If the HP is normal, button is invalid. For
example,
7.2.9 Time setting/Timer setting
Select and press to enter, press again to Timer on/Timer off setting.
- 16 -