Werbung
Verfügbare Sprachen
Verfügbare Sprachen
This includes frozen fruit, frozen
yoghurt, ice cream or ice. These can
be added up to the level marked
FROZEN INGREDIENTS for the
corresponding number of servings.
6 Screw the lid onto the goblet.
7 Either put the cap into the lid, then
turn. Or place the stirrer in the hole.
The stirrer can be used when
blending thick mixtures or when
large quantities of frozen items are
used.
8 Operate on Speed 1 for up to 30
seconds, this is to start the mixing
process, then operate on Speed 2.
Allow the ingredients to blend until
smooth.
Use the stirrer by moving it in an anti
clockwise direction.
9 Place a glass under the tap, operate
on Speed 1 and press down on the
dispensing tap lever.
Thinner drinks may dispense without
having to switch on the power unit.
Use the stirrer to assist when
dispensing thick smoothie drinks.
To help dispense the last amount of
a thick smoothie drink, add a few
tablespoons of liquid to increase the
flow.
10 When the glass is full, switch off and
release the lever.
hints
To make a thinner smoothie drink
add more liquid.
To make a thicker smoothie drink
add more frozen ingredients.
Before fitting the lid, push the solid
ingredients into the liquid using the
stirrer.
Press button P to operate the
power unit in a start stop action to
control the texture of your drink.
Take care as this automatically
selects the higher speed and may
cause the drink to be thrown up the
sides and onto the lid of the goblet.
After blending, some drinks may not
be completely smooth due to seeds
or the fibrous nature of ingredients.
Some drinks may separate on
standing, therefore it's best to drink
them straight away. Separated
drinks should be stirred before
drinking.
important
Never blend dry ingredients (eg
spices, nuts) or run the Smoothie
Blender empty - it's intended for
blending smoothie drinks only.
Don't use the blender as a storage
container. Keep it empty before and
after use.
Some liquids increase in volume and
froth during blending eg milk, so do
not overfill and ensure the lid is
correctly fitted.
To ensure long life of your Smoothie
Blender, never run it continuously for
longer than 60 seconds.
Never blend food that has formed a
solid mass during freezing, break it
up before adding to the goblet.
cleaning
Always switch off, unplug and
dismantle before cleaning.
Never let the power unit, cord or
plug get wet.
Empty the goblet before unscrewing
it from the blade unit.
Always wash immediately after use.
Don't let food dry onto the goblet
assembly as this will make cleaning
difficult.
Don't wash any part in the
dishwasher.
Regularly dismantle the tap and
clean the parts thoroughly.
blender unit
Before dismantling the blender, half
fill the goblet with warm water. Fit
the lid and cap then place on the
power unit. Operate on Speed 1 and
whilst running, open the tap and
allow the water to drain into a
container to clean the valve. This can
be repeated until the water runs
clear. If further cleaning is necessary
dismantle the unit first.
3
Werbung
