Jtlb 30 G With Twistlock System - Jung K-Serie Betriebsanleitung

4.2 JTLB 30 G with twistlock system

The JTLB 30 G with twistlock system is
installed analogously.
8
No. Designation
1a Long tie rod (1400 mm)
1b Short tie rod (960 mm)
2 Connection plates
3 Washers
4 Screws M12
5 Steering gear unit
6 Screws M16
7 Draw bar
8 Towing bar
9 Bolt
- 36 -
5 6
1a
9
Quantity
2
2
4
32
32
2
6
1
1
2
1a
6
7
1b
The tie rods (1a and 1b) must be
mounted on the same side, respectively,
at the front and rear.
> Fasten the long tie rod (1a) and short tie rod (1b)
with connection plates (2), washers (3) and screws
(4).
> Mount tie rods (1a/1b) to the steering gear units
(5) and fix in place with screws (6).
> Push the draw bar (7) into the tie rods (1a/1b) and
fix in place with screws (6).
> Mount the towing bar (8) to the draw bar (7) and
fix in place with bolts (9).
© JUNG Hebe- und Transporttechnik GmbH
Tandem trolleys, K and G series
4
3
2
1b
5