Installation; Jtlb 30 G With Rotary Plate - Jung K-Serie Betriebsanleitung

4. Installation

4.1 JTLB 30 G with rotary plate

The JTL 20 G with rotary plate is installed
analogously.
5
No. Designation
1 Tie rod
2 Steering gear unit
3 Screw M16
4 Draw bar
5 Towing bar
6 Bolt
> According to the required width, mount the tie rods
(1) to the steering gear units (2) and fix in place
with screws (3).
> Push the draw bar (4) into the tie rods (1) and fix in
place with screws (3).
> Mount the towing bar (5) on the draw bar (4) and
fix in place with bolts (6).
© JUNG Hebe- und Transporttechnik GmbH
2
3
6
1
Quantity
2
2
6
1
2
2
3
4
Variant
2
5
Both steering gear units (2) can also be used separate-
ly with one towing bar (5) each.
Tandem trolleys, K and G series
1
2
2
5
- 35 -