Disassembly; Special Safety Guidelines; Disassemble The Brake (Completely); Dismantle The Brake - Stromag KMB-ZM Serie Montageanleitung

10 Disassembly

10.1 Special safety guidelines

CAUTION
Risk of accidents due to non-observance of the safety guidelines
There is a risk of accidents if the general safety guidelines are not observed.
► All safety guidelines must be observed, see section 2.

10.2 Disassemble the brake (completely)

Disassembly of 1. Switch off the drive and pressurised medium supply and secure from switching back on.
the complete
2. Slowly release the hydraulic/pneumatic system.
brake
3. Carry out disassembly of the brake in reverse order of assembly, see section 6.4.

10.3 Dismantle the brake

DANGER
Risk of accidents caused by components subjected to spring pressure
Disassembly work on the brakes that is not carried out correctly may lead to the sudden release of
the pressure springs, which can lead to serious injuries.
► Any disassembly or maintenance work should be carried out by Stromag. For this purpose, re-
quest a qualified specialist approved by Stromag or remove the brake, see section 10.2, and send
it to Stromag, see section 11.2.
► The procedure described in this documentation must be followed precisely.

10.4 Final decommissioning

Final decommis- 1. Disassemble the brake completely, see section 10.2.
sioning
2. Dispose of all parts, operating and auxiliary materials.
Mounting instructions Pressure-operated spring-actuated multi-disc brake KMB-ZM, KLB-ZM • No. 777-00001 D • 10/2017
ENVIRONMENTAL HAZARD
Collect any potentially leaking auxiliary and operating materials.
RECYCLING
Dispose of auxiliary and operating materials according to the local guidelines in a
correct and environmentally-friendly way.
ENVIRONMENTAL HAZARD
Collect any potentially leaking auxiliary and operating materials.
RECYCLING
Dispose of components as well as auxiliary and operating materials according to
the local guidelines in a correct and environmentally-friendly way.
41