Note; Environmental Protection/Recycling; Safety Devices On The Brake; Safety Symbols/Pictograms On The Brake - Stromag KMB-ZM Serie Montageanleitung

2.7.4

Note

NOTE
Indicates special user tips and other particularly useful or important information for efficient work as
well as economical use.
2.7.5

Environmental protection/recycling

ENVIRONMENTAL HAZARD
Indicates environmental hazards as well as measures for environmental protection.
RECYCLING
Indicates measures for recycling or disposal of components as well as auxiliary and operating materi-
als.
2.8

Safety devices on the brake

After installing the brake, the manufacturer of the complete machine is responsible for enclosing the brake in a
housing or equipping it with a safety guard on the rotating components in accordance with applicable national
guidelines.
Operating the brake without a safety guard or proper housing on the rotating components is not permitted.
2.9

Safety symbols/pictograms on the brake

The brake does not have any safety symbols/pictograms.

2.10 Wear personal protective equipment

Personal protective equipment must be worn for all work to be carried out, see section 2.7.3. The wearing of
personal protective equipment must be monitored by the operator. It may be the case that the operator has to
meet additional measures.

2.11 Basic responsibilities of the operator and personnel

The following basic responsibilities of the operator and personnel must always be observed when handling the
brake:
• Combining use of the brake with other units can lead to additional ignition hazards. The combination must be
re-evaluated according to the applicable guideline as well as all current local regulations and any ignition
sources must be suppressed.
• All currently applicable local safety and accident prevention regulations, as well as the regulations and guide-
lines of the explosion protection, are to be observed.
• After assembling the brake, a risk analysis of the workplace must be carried out by the operator on the com-
plete machine. In addition to the documentation, operating instructions must be created.
• In addition to the documentation, observe and instruct adherence to general legal and other binding regula-
tions on accident prevention and protection of the environment. Such obligations can also, for e.g., affect the
handling of hazardous substances or the provision/wearing of personal protective equipment.
• Supplement the documentation with your own instructions, including supervisory and reporting obligations for
specific operational matters, e.g., with regards to the organisation of work, work sequences and appointed
personnel.
8
Mounting instructions Pressure-operated spring-actuated multi-disc brake KMB-ZM, KLB-ZM • No. 777-00001 D • 10/2017