Automatic Switch Off
The function stops the hob automatically if:
• all cooking zones are off.
• you do not set the heat setting after you start the hob.
• you cover a sensor field with an object (a pan, a cloth, etc.) for longer than 10 seconds.
The sound operates until you remove the object.
• the hob gets too hot (e.g. when a saucepan boils dry). Before you use the hob again, the
cooking zone must be cool.
• you use incorrect cookware.
automatically.
• you do not stop a cooking zone or change the heat setting. After some time
on and the hob stops. See the table.
Automatic Switch Off times
Heat setting
Stops after
The heat setting
Touch the control bar at the heat setting. Change
to the left or the right, if it is necessary. Do not
release before you have a correct heat setting. The
display shows the heat setting.
The automatic heat up
Automatic heat up function sets the high-
est heat setting (not
and then decreases to the necessary level.
To start function touch the symbol
than set necessary heat setting.
on when the cooking zone operates on
highest heat setting.
To stop the function change heat setting.
Switching the Power function on and off
The Power function makes more power available to the induction cooking zones. The Power
function is activated for 10 minutes at most. After that the induction cooking zone auto-
comes on and after 2 minutes the cooking zone stops
-
6 hours
5 hours
) for some time,
and
comes
Operating instructions
-
-
4 hours
12
11
10
9
8
7
6
5
4
3
2
1
0
1
2 3 4 5 6 7 8 9 10 11 12 13 14
29
comes
-
1.5 hours
A