Using The Timer - AEG 96931K-MN Benutzerinformation

Step
1.
2.
Touch
Until the appliance is next switched off, it can used as normal. After switching off the appliance,
the child safety device is active again.
After overriding the child safety device, a heat setting or a function must be set within
approx. 10 seconds, otherwise the appliance automatically switches itself off.

Using the timer

Function
Automatic cut-out
Countdown timer
If just one countdown value is set you can change it only when the appliance is switched
on.
If a heat setting is set on this cooking zone in addition to a countdown timer, the cooking
zone is switched off after the time set has elapsed.
If a cooking zone is switched off, the timer function set is also switched off.
Selecting a cooking zone
Step Control panel
1.
Touch
2.
Touch
3.
Touch
4.
Touch
5.
Touch
If other timer functions are set, after a few seconds the shortest remaining time of all the
timer functions is displayed and the corresponding pilot light flashes.
Control panel
Switch appliance on
for 4 seconds
a heat setting is set
cooking zones not in use
Pilot light of the first cooking zone flashes
once
Pilot light of the second cooking zone flashes
once
Pilot light of the third cooking zone flashes
once
Pilot light of the fourth cooking zone flashes
once
Pilot light of the fifth cooking zone flashes
once
Operating the appliance
Condition
Display
Display/Signal
lights up
Outcome after the time has
elapsed
acoustic signal
00
flashes
Cooking zone switches off
acoustic signal
00
flashes
9