Operating The Appliance - AEG 96931K-MN Benutzerinformation

6

Operating the appliance

Residual heat indicator
The residual heat indicator lights up, as soon as one cooking zone is hot.
WARNING!
Risk of burns from residual heat! After you switch the appliance off, the cooking zones
need some time to cool down. Look at the residual heat indicator.
Use residual heat for melting and keeping food warm.
Operating the appliance
Switching the appliance on and off
Switch on
Switch off
After switching on, within approx. 10 seconds a heat setting or a function must be set,
otherwise the appliance automatically switches itself off.
Setting the heat setting
To set the heat
setting
Switch off
Switching the outside ring on and off
By switching the outside rings on or off, the effective heating surface can be matched to
the size of the cookware.
Before an outside ring can be switched on, the inside ring must be switched on
Triple cooking zone
To switch on the central ring
To switch on the outside ring
To switch off the outside ring
To switch off the central ring
Display
Child safety device
Automatic Switch off
Control panel
Touch for 1 second
Touch for 1 second
Control panel
Touch the desired heat setting, if necessary, correct
up or down
Touch
Touch
Touch
Touch
Touch
Lock/Child safety device is set
Switch off is active
Display
/
/ none
Sensor panel
for 1-2 seconds.
for 1-2 seconds.
for 1-2 seconds.
for 1-2 seconds.
Description
Pilot light
lights up.
goes out.
Display
/ to
Pilot light
Second pilot light lights up
Third pilot light lights up
Third pilot light goes out
Second pilot light goes out