Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6.2.1
Storage (only Validate
mode)
Fig. 37: Memory menu
6.3
Repeating the
measurement
6.4
Switching off the
device
7
Calibration
After the "Validate" measurement "Store" will
•
appear in the display.
NOTE!
Sie haben dennoch die Möglichkeit, die nächste
Messung zu starten ohne zu speichern.
However you have the possibility to start the next
measurement without storing before.
If you want to store the result, tap on „Store"
•
Select the customer, the project or the room.
•
•
Type in a number for the measurement and
confirm with OK. Corrections can be made
with the button B.
The data is stored as a txt-file on the memory
card. The data can be read on the computer and
exported to Excel.
Due to variations in the ventilation system we
recommend to repeat the measurement two or
three times. After every measurement wait until
the ventilator has stopped or - in case of large
volume flows - until the ventilator runs in its un-
compensated speed.
Press the On/ Off button on the left side of the
monitor.
Before the monitor switches off, information about
the device will appear briefly on the display.
We recommend to send the device for calibra-
•
tion to Wöhler once a year.
Calibration
43
Werbung
Kapitel
Inhaltsverzeichnis
