Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6
Measuring
EMERGENCY STOP!
To interrupt a measurement, press briefly the red Start/Stop-Button, see fig. 8. There-
upon the ventilator will spin out.
Fig. 34: Monitor with On/ Off button
Fig. 35: Start menu
Press the On/ Off button on the left side of the
•
monitor to switch on the device.
After 3 seconds the measurement screen appears
in the display. The measurement mode which you
have selected in the options menu will appear
(see chap. 6).
If you want to change the measuring mode,
•
tap on the arrow on the top right to open the
start menu.
Select the measuring mode by tapping on
•
"Adjust", "Validate" or "Heat Performance".
Measuring
41
Werbung
Kapitel
Inhaltsverzeichnis
