BEARWARE 303530 Kurzanleitung Seite 24

In this way, you can change and customise the following settings in the sequence
mentioned below:
• Time zone
• Language setting - To set the day on the display. The following
codes can be configured and selected using the "UP" and "DOWN"
buttons: GER (German), FRE (French), ITA (Italian), DUT (Dutch),
SPA (Spanish), DAN (Danish), ENG (English)
• Year
• Day/month format
• Month
• Day
• 12 or 24 hour display
• Hour
• Minute
• Second
8.1 Altitude correction settings
This weather station can configure different operating altitudes, as the pressure
varies depending on the altitude. The default altitude is 0m above sea level.
1. in the default screen, press the "MODE" button 3 times to access the alti-
tude adjustment mode. The screen displays only the altitude value.
2. Press and hold the "SET" button for about 3 seconds in the altitude adjust-
ment mode to configure the altitude correction setting. The configured
altitude flashes in the display.
3. Press the "UP" and "DOWN" buttons to change the altitude correction
value.
4. During the setup, you can press the "MODE" button to change the current
altitude unit. The air pressure unit which is displayed in the default screen
changes along with the length unit to "M/hPa" or "Ft/inHg".
The altitude correction range is -90m to 1990m.
When the setup is complete, press the "SET" button to confirm the altitude cor-
rection setting or wait for 10 seconds until the menu closes automatically.
24
English