BEARWARE 303530 Kurzanleitung Seite 18

4. Buttons
Symbol Button
MODE: Press the "MODE" button in the default screen to select
between the different display modes. If you do not press any
button within 10 seconds, the weather station switches back to
the default screen).
SET: Press the "SET" button in the default screen to select be-
tween °C and °F. Alternatively, you can set the date and time by
pressing for 2-3 seconds in the time mode.
ALARM: Press the "ALARM" button in the default screen to
switch the Alarm 1/2 on or off.
CHANNEL: Press the "CHANNEL" button in the default screen
to change between the radio channels 1, 2 and 3. Hold the
button to delete the previously displayed values. The deletion is
confirmed with a beep.
DOWN: Use the button to change the values in the settings.
UP: Use the button to change the values in the settings. Press
the button in the default screen to change between the current,
minimum and maximum temperature display. Press the button
for about 2-3 seconds to reset the temperature displays.
SNOOZE/LIGHT:
• When operating the device with batteries, press the "SNOOZE
/ LIGHT" button to turn on the backlight for 5 seconds.
• When operating the device using a power adapter, you can
choose between four different brightness levels (Light Off,
Level 3, Level 2, Level 1) using the "SNOOZE/LIGHT" button .
You can press the "SNOOZE/LIGHT" button as soon as the alarm
goes off to put the device in snooze mode for 5 minutes. The
alarm goes off once again after 5 minutes.
18
English