Operation - M&C MP Serie Betriebsanleitung

KNF MOTOR M 56 EX
Translation of Original Operating- and Installation Instructions, english, KNF 121220-121648 09/17
7.

Operation

 Only operate the motor under the operating parameters and
conditions described in Chapter 0, Technical data, and in Sec-
tion 2.3, Use in hazardous areas.
 Make sure the motor is used properly (see section 2.1).
 Make sure the motor is not used improperly (see section 2.2).
 Observe the safety precautions (see Chapter 3).
Danger of explosion due to increased ambient
temperature!
 Monitor ambient temperature (compression heat,
motor heat).
WARNING
 Ensure sufficient supply of cooling air.
Danger of serious damage to persons or property
Changes from normal operation (higher power
consumption, temperatures or vibration, unusual
noises or odors, triggered monitoring devices) are an
WARNING
indication that function has been affected.
 In case of any deviations from normal operation,
switch off the motor, then determine and remedy
the cause.
Operation
16