Technical Data - M&C MP Serie Betriebsanleitung

Diaphragm Pumps PJ19423-726 EX
Translation of Original Operating- and Installation Instructions, english, KNF PJ19423-726 EX 09/16 11
4.

Technical data

Pump materials
Assembly
Pump head
Diaphragm
Valve
Tab. 8
Pneumatic values
Parameter
Max. permissible operating pressure [bar g]
Ultimate vacuum [mbar abs.]
Delivery rate at atm. pressure [l/min]*
Tab. 9
Other parameters
Parameter
Permissible
ambient temperature
Permissible media temperature
Electrical data
Gas tightness of pump head*
Tab. 10
* After opening the pump head or replacing the diaphragm and
valve plates the gas tightness is no longer guaranteed. A leak test
is able to verify that the original standard of gas-tightness has
been achieved.
Technical data
Material*
PTFE
CR/PTFE-coated
PTFE
Value
1.5
53
13
*Litres in standard state (1,013 mbar)
Value
+ 5 °C to + 40 °C
+ 5 °C to + 40 °C
See drive-motor type plate
-3
< 6 x 10 mbar l/s