BIOS-Einstellungen
Bios-Eintrag
Power-Supply Type
SoftOff on Overheat
RC ACPI Settings
CPU Configuration
Trusted Computing
ACPI Settings
SCH3114 Super IO Configuration
Hardware Monitor
Serial Port Console Redirection
AMI Graphic Output Protocol Policy
PCI Subsystem Settings
USB Configuration
NVMe Configuration
Power Controller Options
SATA And RST Configuration
AMT Configuration
Tls Auth Configuration
Network Stack Configuration
Intel(R) I210 Gigabit Network
Connection 00:01:05:52:C3:3D
Intel® Rapid Store Technology
Intel(R) Ethernet Connection (2)
I219LM 00:01:05:52:C7:3C
Driver Health
36
Option
[ATX/AT]
Disabled / Enabled / Enabled (Emulate PwrBtn)
Untermenü siehe: RC ACPI Settings [} 37]
Untermenü siehe: CPU Configuration [} 38]
Untermenü siehe: Trusted Computing [} 39]
Untermenü siehe: ACPI Settings Enabled [} 39]
Untermenü siehe: SCH3114 Super IO Configuration
Untermenü siehe: Hardware Monitor [} 44]
Untermenü siehe: Serial Port Console Redirection [} 45]
Untermenü siehe: AMI Graphic Output Protocol Policy
[} 48]
Untermenü siehe: PCI Subsystem Settings [} 49]
Untermenü siehe: USB Configuration [} 51]
Untermenü siehe: NVMe Configuration [} 52]
Untermenü siehe: Power Controller Options [} 53]
Untermenü siehe: SATA und RST Configuration [} 54]
Untermenü siehe: AMT Configuration [} 57]
Untermenü siehe: TLs Auth Configuration [} 61]
Untermenü siehe: Network Stack Configuration [} 64]
Untermenü siehe: NIC Configuration [} 67]
Untermenü siehe: Intel Rapid Storage Technology [} 68]
Untermenü siehe: NIC Configuration [} 70]
Untermenü siehe: Driver Health [} 71]
Version: 1.0
CB3067