Mediclinics Machflow Serie Montage- Und Benutzerhandbuch Seite 16


Clean the casing using a damp cloth moistened in a solution of neutral soap and water.
After cleaning the entire surface rinse the soap from the casing using another cloth
moistened in water and dry using a dry cloth.

Close the hand dryer by assembling the casing once more, tightening the screws that
fix the casing to the base and connect to the power grid.

Start the hand dryer up 2 or 3 times in a row to ensure that all remaining dust is
extracted.
CLEANING OF CHROMED AND GOLD PLATED COVERS
For cleaning purposes only a wet cloth is to be used. Do not use any kind of
detergent, acids, lye, abrasives, hydrochloric acid, etc.
Take care not to damage or force any component.
REPLACEMENT OF INLET AIR FILTER
The method to proceed when replacing this filter is as shonw on Fig. 16..
Figure 16.
15