Set Radio; Station Scan - Auriol HG05056-MSF Bedienungs- Und Sicherheitshinweise

function activated, hold the "SNOOZE" touch button
3 seconds or press the "Alarm" button
The alarm will then remain off until the next alarm time reoccurs.
Note: In clock mode, press the "Alarm" button
quickly switch between the "Alarm on" / "Alarm on with snooze" /
"Alarm off".

Set radio

Station scan

The radio will receive FM stations at frequencies between 87.5 MHz
to 108 MHz via the cable aerial
as described below:
Press the "FM" button
radio mode. The radio frequency display
Hold the "+" button
The radio will start scanning for stations. The station scan will
stop on the first station found.
When pressing the "+" button
3 seconds again, the radio will continue scanning stations.
The "Volume +" button
The"Volume –" button
Aim the cable aerial
Press the "FM" button
from radio mode to clock mode.
. To scan for stations proceed
11
. The light alarm clock is now in
16
or the "–" button
19
or the "–" button
19
increases the volume.
18
lowers the volume.
17
so the radio has optimal reception.
11
for the light alarm clock to return
16
once.
22
once to
22
will be displayed.
29
for 3 seconds.
20
20
GB/IE/NI
for
2
for
23