Troubleshooting - Klarstein BON VIVANT Handbuch

TROUBLESHOOTING

Fault Cause
Light on, The leaf blocked.
but motor
The capacitor damaged.
does not
work.
The motor us damaged.
The internal with of motor off or a
bad smell from the motor
Light does Beside the above mentioned, check the following:
not work,
Light damaged
motor does
not work.
Power cord looses
Oil Valve and the air ventilation
leakage. entrance are not tightly sealed
Leakage from the connection of
U-shaped section and cover
Shake of The leaf is damaged
the body.
The motor is not tightly hanged
Insufficient The distance between the body
suction. and the gas top too long
Too much ventilation from open
doors or windows
Solution
Get rid of the blocking.
Replace capacitor.
Replace motor.
Replace motor.
Replace lights.
Connect the wires as per the
electric diagram.
Take down the one way valve and
seal with glue
Take U-shaped section down and
seal with soap or paint.
Replace the leaf
Lock the motor tightly.
Readjust the distance.
Choose a new place and
resemble the machine.
EN
19