Mark COLDSTREAM Technisches Handbuch Seite 21

It is forbidden to:
Leave any flammable materials near to electrical panels.
Operate on the electrical equipment before cutting power supply off.
Operate on any part of the unit before the plant did stop.
Operate with safety systems deactivated or removed from the equipment.
Deactivate or evade the alarm signals.
7.3.2 On board signs
DANGER: Risk of electric shock
MOVING MACHINERY
7.3.3 Residual risks
Pay attention to fan movement. Do not introduce arms or limbs. Mechanical danger
It is forbidden to use water to clean electro-mechanical components – Electrocution danger
It is absolutely forbidden to use water to put out fires.
Use exclusively powder or CO2 extinguishers
Once maintenance is terminated, before switching back the equipment on and starting-up the plant,
perform a complete check for any tools and/or materials of any nature left near to or inside the unit
and above all near to any moving mechanisms.
7.3.4 Technical assistance request
For any technical assistance intervention, contact the installer.
8.0 Dismantling
In case of dismantling and disposal of the plant, all material concerning the plant must be collected
and sent to the appropriate collection and disposal centres of companies specialized in the disposal
sector.
Dismantling of the plant must be carried out by specialized personnel, equipped with suitable
!
equipment and personal individual protection devices.
Do not smoke and do not use open flames.
EN
21