Starting The Fan - Harvia Sentiotec Pro C2 Montage- Und Gebrauchsanweisung

Instructions for use for the user
2. Press the intensity selector 3.
► The light switches on.
► The intensity selector 3 lights up.
► In the intensity display, "ON" appears.

10.6. Starting the fan

When the dimmer switch function is activated
When the dimmer switch function for the light is activated, the power for the fan
can be set to a scale of 0 to 100. At 0, the fan is switched off. 100 corresponds
to full power.
1. Turn the function selector 2 to position D (fan).
► The fan symbol lights up.
2. Use the intensity selector 3 to set the preferred power of the fan.
3. Press the intensity selector 3.
► The fan switches on.
► The intensity selector 3 lights up.
When the dimmer switch function is deactivated
When the dimmer switch function for the fan has been deactivated, you can only
switch the fan on and off. The device will always operate at full power.
1. Turn the function selector 2 to position D (fan).
► The fan symbol lights up.
► In the intensity display, "OFF" appears.
2. Press the intensity selector 3.
► The fan switches on.
► The intensity selector 3 lights up.
► In the intensity display, "ON" appears.
p. 36/48