Accessories - Kindermann compact2 80 Installations- Und Bedienungsanleitung

For safe transport the ceiling lift is delivered in lifted condition. It can be mounted immediately.
Supplied with flexible spiral for guiding the signal and control cables to the projector, four height-adjustable mounting kits
for fixing the ceiling plate, and four sets of screws for fastening the projector.
A stencil for drill-holes (1:1) is included. The certified fixing material for your ceiling construction is not supplied!
2.3 Zubehör
࿼ 7466000152 Ceiling plate with T-profile, for invisible mounting, integration of the ceiling cutout (600 x 600 mm) in the lift.
Colour: powder-coated matt white (RAL 9003).
࿼ 7466000153 Ceiling plate standard version, for covering the ceiling cutout.
Metal plate (640 x 640 x 1 mm) with screws; colour: powder-coated matt white (RAL 9003).
࿼ 7466000102 Programming unit Becker, with 4-pin connection cable / 230V~ schuko plug; for programming the stop positions.
࿼ 7466000012 Joint,, with long spider arms for large projectors.
࿼ 7466000016 Mechanical safety switch, 230 V~, 10 A for switching off the power supply of the projectors when lift is in upward
position, resp. status sensor for media control („lift up"). Stop position adjustable.
࿼ 7466000019 Extension set with stabilizers, for the concealed mounting of the ceiling lift on the real ceiling (if the false ceiling
can't hold the weight). Supplied with 4 threaded extension poles M8, length 100 cm, 2 stabilizers, white; with all screws, nuts,
washers, rings; without additonal mounting material.
࿼ 5699000020 Radio remote control, sender and receiver for remote-controlling motorized lifts.
࿼ 5699000021 IR remote control, sender and receiver for remote-controlling motorized lifts.
࿼ 5699000022 Motor control unit, with 2 relay inputs.
࿼ 5944000001 Key switch, 230V~ for up/down control.
࿼ 5944000002 Up/down switch, 230V~ 2-pin, white, on-wall mounting.
20