Helpful Hints And Tips; Care And Cleaning; What To Do If - IKEA framtid hinf4t Gebrauchsanweisung

ENGLISH
If cookware that is not suitable is used,
lights up in the display and after 2 mi-

Helpful hints and tips

Cookware is suitable for induction cook-
ing zones if marked by the manufacturer.
When a cooking zone is switched on, it
may hum briefly. This is a characteristic of
all ceramic glass cooking zones and does not
impair either the function or the life of the ap-
pliance.
Cookware sizes
Induction cooking zones adapt automatically
to the size of the bottom of the cookware. But,
it must have a minimum diameter of 125 mm

Care and cleaning

Warning! Switch the appliance off and
let it cool down before you clean it.
Warning! For safety reasons, do not
clean the appliance with steam blasters
or high-pressure cleaners.
Warning! Sharp objects and abrasive
cleaning agents will damage the
appliance. Clean the appliance and remove
the residues with water and washing up liquid
after each use. Remove also the remnants of
the cleaning agents!
Scratches or dark stains on the glass ce-
ramic that cannot be removed do not af-
fect the functioning of the appliance.

What to do if...

Problem
The appliance
switched on or is not operating.
cannot be More than 10 seconds have
passed since the appliance was
switched on.
The child safety device is switched
on
nutes the indicator for the cooking zone
switches itself off.
Energy saving
• If possible, always place lids on the pans.
• Place cookware on the cooking zone before
you switch it on.
• The bottom of the cookware should be as
thick and flat as possible.
Removing the residues and stubborn
residues:
1. Food containing sugar, plastics, tin foil res-
idues should be removed at once, best tool
for cleaning glass surface is a scraper (not
included with the appliance). Place a scra-
per on the glass ceramic surface at an an-
gle and remove residues by sliding the
blade over the surface. Wipe the appli-
ance with a damp cloth and a little washing
up liquid. Finally, rub the appliance dry us-
ing a clean cloth.
2. Limescale rings, water rings, fat splashes,
shiny metallic discolorations should be re-
moved after the appliance has cooled
down using cleaner for glass ceramic or
stainless steel.
Possible cause and
.
Remedy
Switch the appliance on
again.
Deactivate child safety
device (See the section
"Child safety device" ).
9