Operation; Heat And Blower Levels - Silvercrest SHAC 2400 C2 Bedienungsanleitung

WARNING! RISK OF PERSONAL INJURY!
Do not take the hair dryer into use if it has fallen down or
►
is damaged in any way. Arrange for the appliance to be
checked and/or repaired by qualified technicians.
Do not cover the air intake grill while operating the appliance.
►
Clean the grill at regular intervals.
The hair dryer becomes hot when it is in use. Hold it only by
►
the grip when it is hot.
NOTE
No user action is required to switch the product between
►
50 and 60 Hz. The product adapts automatically to either
50 or 60 Hz.

Operation

Heat and blower levels

NOTICE
► Run the hairdryer at the highest blower and heat levels for about 2–3 minutes
before first use. This helps to remove any production residues that may remain
in the interior of the appliance.
1) Insert the plug into a power socket.
2) Switch the hair dryer on with the blower level switch 3.
The hair dryer is fitted with two function switches. With these you can separately
select the strength of the air flow (blower level switch 3) and the level of heat
(heat level switch 4):
Blower levels
0
│ GB │ IE │ NI
■ 6
The hair dryer is switched off
reduced air flow
full power air flow
SHAC 2400 C2