Operation - Silvercrest SRH 1600 A1 Bedienungs- Und Sicherheitshinweise

Regularly check the power plug
and the power cord for damages .
If the power cord is damaged,
it must be replaced by the
manufacturer, its service agent or
similarly qualified persons in order
to avoid a hazard .
Protect the power cord against
damages . Do not let it hang over
sharp edges, do not squeeze or
bend it . Keep the power cord
away from hot surfaces and open
flames .
For additional protection, the
installation of a residual current
device (RCD) having a rated
residual operating current not
exceeding 30 mA is advisable in
the electrical circuit supplying the
bathroom . Ask your installer for
advice .
The use of extension cords is not
recommended . If the use of an
extension cord is necessary, it must
be designed for a current flow of
at least 10 A . Lay cords in such a
way that they may not be tripped
over or otherwise damaged .

Operation

mWARNING! Risk of electric
shock! Do not use this product
near bathtubs, showers, basins or
other vessels containing water .
The product must not be left
unattended while it is connected to
the supply mains .
Do not operate the product with
wet hands or while standing on a
wet floor . Do not touch the power
plug with wet hands .
Do not pull the power plug out of
the electrical outlet by the power
cord . Do not wrap the power cord
around the product .
GB 9